Boiled Linseed Oil

Safe to use on most surfaces

• Bamboo
• Cedar
• Cedar
• Cement
• Concrete
• Concrete
• Flagstone
• Maple
• Pale Woods
• Pavers
• Pine
• Pressure Treated Wood
• Pressure Treated Wood
• Stone
• Walnut
• Wicker

Application Instructions

DIRECTIONS: Apply on well sanded wood, concrete or stone that is free of lint, wax or debris. Apply Solvable Boiled Linseed Oil sparingly with a soft cloth or brush. Do NOT apply with a sponge. For more even penetration, dilute with up to an equal part of Solvable Turpentine or Solvable Paint Thinner. Always wipe off any oil that has not penetrated the surface after 20 min to half an hour. Wait until the first coat is dry before applying a second coat; normally approximately 24 to 36 hours. Oil will impart a darker colour to the wood compared to Raw Linseed oil. On porous stone or concrete, the oil will darken the stone and impart a “wet” look. To test the darkening effect on wood or stone, simply wet a small portion of the surface to be treated with a wet rag or seek professional advice.

Oil soaked rags should be washed immediately, disposed of in a container of water, or hung outside to dry for a few days. DO NOT leave crumpled oil-soaked rags unattended.

Use As Per Label Directions